Doepfer

The output switch is identified on the website as an error. The 188-2 outputs always have some clock noise apparent; again this is flagged up on the website. Also check you have the attenuators set to the centre as they are polarisers. 

The 188-1 is cleaner if that's what you are after but you have less options!!

Neil

Sent from my iPhone

> On 12 Jul 2015, at 20:00, Zubo Karijes zubo.karijes@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Hi All,
> 
> I bought a new 188-2 and have the following issues: The output channels are swapped - the top row of dials affects the second channel…+ much worse, the output always seems to have some feedback going on even if the dial is at zero, I cannot get a clean response demonstrated in some Youtube videos…. Any ideas? Docs about the trim settings?
> 
> Cheers
> 
> Zlatko
>