Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] A-141-2 - Efficient Velocity Patch

2015-10-09 by Nicholas Keller

You should try A-190-4 CV2 to LevCV input, A-190-4 Gate out to A-141-2 Gate In (you don't mention that, but I assume you patched it), VarOut to A-131 CV In, sound source to A-131 audio In. Velocity then should control the level of the variable output. The A-130 you are using already exists (in a way) within the A-141-2: the input source to this VCA is the envelope output (+5V max), LevCV being its CV input, and the Var Out being its output. This will free up your A-130 for something else




On Thursday, October 8, 2015, Wolfram Henke rheinlandhippie@yahoo.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:

Hi,
the module description for the awesome A-141-2 on miscellaneous sites on the internet (and obviously @doepfer.de) bring out some kind of an easy and efficient way to obtain velocity via “Var Out” and “Lev CV”.
Well, after trying different possibilities I always find the best solution in patching the classic way: A-190-4/CV2 => A-130/CV2 | A-141-2/Fixed (or Var) Out => A-130/Audio In | A-130/Audio Out => A-131/CV2 | “Soundsource” => A-131/Audio In | A-131/Audio Out…
Is there anybody out there with a concrete hint or is the whole approach of mine completely wrong?
Thank you very much indeed for any reasonable input :-)
Best regards from Cologne/Germany
Wolfram

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.