Doepfer

Thanks for the info Dieter. It may be that I get "better" sines by adjusting the FM Aids as they expect 5V point to point. What I'm getting at the moment are some very odd looking shapes :-) They sound rather interesting but not what I needed for this patch to work. 

Thanks again,

David



www.movingisliving.co.uk

Sent from my iPhone 

> On 26 Nov 2015, at 09:13, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> > Hi - can anyone tell me what the Peak to Peak on the single outa of an A113 is? I'm trying to do something with the
> > single outs that is not working as expected. I'm putting them into FM Aids to convert to sine waves for a special
> > application but the FM Aids do not seem to be doing this as expected. FM Aids work very well changing A110 Saws to Sines
> > (also Rubicons, Z3000s). So I'm wondering what is different about the A113 outs.
> >
> > The A113 is a new one - no 5v needed.
> >
> > David
> 
> The single output levels are about 4Vpp. But the waveforms are far away from a perfect sawtooth as the A-113 circuit tries to
> simulate the waveform of the original trautonium oscillator which was also no a perfect sawtooth. If the converter expects a
> standard sawtooth it will not work.
> 
> Best wishes
> Dieter Doepfer
> 
>