Doepfer

> Hi there Doepfer techs,
>
> Yesterday I received my second A157 and after installing I did a testrun.
> With an LFO using for clock it worked very well.
> However using the internal clock output from one of my A154's the A157 didn't respond.
> Is this due to a too low sensitivity of the A157 clock input?
>
> Cheers,
>
> Jacco Ville

That's strange as during the Superbooth last week I used the clock output of the A-154 all the time to trigger the A-157 (and all
other devices that used the clock). Maybe the PW setting of A-154 clock is too small (near 0%) or too high (near 100%).

Best wishes
Dieter Doepfer