Doepfer

i have done this myself, it's quite straightforward, but agree with dieter in as much as i'd be very reluctant to advise someone on how to do it. it comes under the category of "if you need to ask then you shouldn't do it".
if you have a local "old style" electrical shop near you then get them to do it for you. it won't cost much, maybe 1 hours work, and it will ensure you don't blow up any modules or even yourself.
best wishes,ian c.      From: "yahoo@doepfer.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 To: Doepfer_a100@yahoogroups.com 
 Sent: Wednesday, 1 June 2016, 15:53
 Subject: AW: [Doepfer_a100] Re: How to plug 2 psu3 with 1 power inlet
   
> I'm also curious about this. Looks like nobody has chimed in with an answer yet.

Two or more power supplies can be connected to one mains inlet. Ony simply has to install the correct fuse into the inlet (twice the
value for one PSU in case of two PSUS) and wire the mains inputs of both supplies in parallel to the mains inlet.

But as these works affects parts, pc boards and cables that conduct mains voltage (230/115V) carrying out of these works is allowed
only for experts or authorized personnel who are familiar with all valid safety rules. Laymen are not allowed to carry out these
works ! Danger to Life.

Additional information (for experts only) is available on the FAQ page of our website:

www.doepfer.com > FAQ > A-100 > Wiring the mains inlet, the power supply board and the bus boards


Best wishes
Dieter Doepfer





------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links