Yeah, that sounds reasonnable.I have done this kind of work years before but i would like to be sure if that was the right way to do it ;)Many thanks for answers Envoyé depuis Yahoo Mail pour Android Le jeu. j juin AM à 10:11, yahoo@doepfer.de [Doepfer_a100]<Doepfer_a100@yahoogroups.com> a écrit : I fully agree but from my experience customers react a bit angry if you give that answer :-) Dieter > i have done this myself, it's quite straightforward, but agree with dieter in as much as i'd be very reluctant to advise > someone on how to do it. it comes under the category of "if you need to ask then you shouldn't do it". > > > if you have a local "old style" electrical shop near you then get them to do it for you. it won't cost much, maybe 1 > hours work, and it will ensure you don't blow up any modules or even yourself. > > best wishes, > ian c. > > > From: "yahoo@doepfer.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> > To: Doepfer_a100@yahoogroups.com > Sent: Wednesday, 1 June 2016, 15:53 > Subject: AW: [Doepfer_a100] Re: How to plug 2 psu3 with 1 power inlet > > > > > I'm also curious about this. Looks like nobody has chimed in with an answer yet. > > > Two or more power supplies can be connected to one mains inlet. Ony simply has to install the correct fuse into the inlet > (twice the > value for one PSU in case of two PSUS) and wire the mains inputs of both supplies in parallel to the mains inlet. > > But as these works affects parts, pc boards and cables that conduct mains voltage (230/115V) carrying out of these works > is allowed > only for experts or authorized personnel who are familiar with all valid safety rules. Laymen are not allowed to carry out these > works ! Danger to Life. > > Additional information (for experts only) is available on the FAQ page of our website: > > www.doepfer.com > FAQ > A-100 > Wiring the mains inlet, the power supply board and the bus boards > > > Best wishes > Dieter Doepfer ------------------------------------ ------------------------------------ ------------------------------------ Yahoo Groups Links
Message
Re :AW: AW: [Doepfer_a100] Re: How to plug 2 psu3 with 1 power inlet
2016-06-07 by olivier abbeloos
Attachments
- No local attachments were found for this message.