Doepfer

Sorry didn't read properly. If you're getting it to one of your bus board fine then it's not going to be the regulator

> On 23 Oct 2016, at 12:20, florian anwander fanwander@mnet-online.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Hello
> 
> Am 23.10.2016 um 08:38 schrieb sj230962@gmail.com [Doepfer_a100]:
> > Question now moves onto why I have no -12V, but I do have +12V
> Perhaps the cause is a broken pcb-trace. It might happen, when you 
> remove and re-insert the flatconnector. The movement might break the 
> solderjoint.
> 
> Do you have a multi meter with connectivity check? If yes, the test the 
> connectivity between the pinheaders on the rihght with those on the left 
> and with the flat connectorin the center.
> 
> Florian
>