Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: Doepfer PSU3: fine but module LEDs flash @ power on/off

2016-10-24 by doubleopards@hotmail.com

Measured the output voltages from the +12, 5 and -12 spades on the bus boards. All within .1v, and no sign of any spike at power on/off. So looking good I guess.

Weirdly, I noticed that in my other case with factory-installed PSU3, the LEDs will flash at power off/on when it hasn't been turned on in a while, but if I turn on/off again a few times they stop flashing. So who knows? As long as my case is safe. Thanks again for help!

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.