Doepfer

Thanks, I seize the opportunity to ask whether it's normal or not that on the A-190-3 the gate led is on. Powering on, it blinks several times than it stays on, anyway, even without any connection (USB, MIDI).


----- Mail original -----
De: "yahoo@doepfer.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
À: "Doepfer a100" <Doepfer_a100@yahoogroups.com>
Envoyé: Jeudi 24 Novembre 2016 12:34:44
Objet: AW: [Doepfer_a100] A-190-3 + A190-4 and A-143-1

You find a detailed explanation of the CV/Gate bus principles on our
website:

www.doepfer.com > PRODUCTS > A-100 > Technical details > Power Supply and
System Bus

The A-143-1 does not pick up the gate signal from the bus.

Best wishes
Dieter Doepfer


> Hello,
>
> I purchased an A-190-3 and getting confused a bit for the cv/gate
> bus jumpers option, as I already own a A-190-4.
>
> Will I have to care of keeping/removing the concerned jumpers
> even though the two interfaces will be mounted on different rows
> within the A-100P9 case?
>
> And does the A-143-1 receive gates from the bus if the A-190-3
> jumpers are left mounted as coming from the retailer?
>
> Moreover, Doepfer web page doesn't mention the A-190-4, but since
> it is descending from A-190-1 I think it might be concerned:
> Important notes:
> The module comes with installed bus jumpers for CV and Gate. One
> has to remove the jumpers if e.g. an A-164, A-190-1, A-190-2,
> A-185-1 or A-185-2 is already connected to the CV and/or gate
> lines of the same bus board!
>
> Best, Diego



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links