Doepfer

Thanks and sorry for having asked, I overlooked those few lines. 
Best, Diego 






Il giorno 24/nov/2016, alle ore 15:51, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> ha scritto: 


It is mentioned on the A-190-3 info page: 

www.doepfer.com > English > PRODUCTS > A-100 > Module Overview > A-190-3 

The info page says: "In the A-190-2 the LED shows the gate function (i.e. 
LED = on while gate = high / LED = off while gate = low). In the A-190-3 the 
LED is permanently on and turns off only for a short time when an incoming 
Midi message is recognized." 

Best wishes 
Dieter Doepfer 



<blockquote>
-----Ursprüngliche Nachricht----- 
Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] 
Gesendet: Donnerstag, 24. November 2016 15:15 
An: Doepfer a100 
Betreff: Re: AW: [Doepfer_a100] A-190-3 + A190-4 and A-143-1 


Thanks, I seize the opportunity to ask whether it's normal or not 
that on the A-190-3 the gate led is on. Powering on, it blinks 
several times than it stays on, anyway, even without any 
connection (USB, MIDI). 


----- Mail original ----- 
De: "yahoo@doepfer.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> 
À: "Doepfer a100" <Doepfer_a100@yahoogroups.com> 
Envoyé: Jeudi 24 Novembre 2016 12:34:44 
Objet: AW: [Doepfer_a100] A-190-3 + A190-4 and A-143-1 

You find a detailed explanation of the CV/Gate bus principles on our 
website: 

www.doepfer.com > PRODUCTS > A-100 > Technical details > Power Supply and 
System Bus 

The A-143-1 does not pick up the gate signal from the bus. 

Best wishes 
Dieter Doepfer 



<blockquote>
Hello, 

I purchased an A-190-3 and getting confused a bit for the cv/gate 
bus jumpers option, as I already own a A-190-4. 

Will I have to care of keeping/removing the concerned jumpers 
even though the two interfaces will be mounted on different rows 
within the A-100P9 case? 

And does the A-143-1 receive gates from the bus if the A-190-3 
jumpers are left mounted as coming from the retailer? 

Moreover, Doepfer web page doesn't mention the A-190-4, but since 
it is descending from A-190-1 I think it might be concerned: 
Important notes: 
The module comes with installed bus jumpers for CV and Gate. One 
has to remove the jumpers if e.g. an A-164, A-190-1, A-190-2, 
A-185-1 or A-185-2 is already connected to the CV and/or gate 
lines of the same bus board! 

Best, Diego 





------------------------------------ 

------------------------------------ 


------------------------------------ 

Yahoo Groups Links 





------------------------------------ 
Posted by: diegora@free.fr 
------------------------------------ 


------------------------------------ 

Yahoo Groups Links 




</blockquote>



------------------------------------ 

------------------------------------ 


------------------------------------ 

Yahoo Groups Links 




</blockquote>