Doepfer

Hello

On 27.10.17 20:25 , james.husted@mac.com [Doepfer_a100] wrote:
> Dieter -  Please consider the option of making the variable CV in (on modules that have them) work so if the input attenuator is turned all the way up, that input tracks at 1v/Oct. This is a very convenient and useful alternative too.
I am strictly against this request. You need a much higher modulation 
amount. Imagine an filtermodulation by the A-145, which would be limited 
to a +/- 2.5-Octave range: Assume, your cutoff is at 100Hz (which is 
around the second overtone for a low bass), then you would not be able 
to open the filter by the LFO more than to 320Hz!!!!

If I need 1V/Oct, then there is already a dedicated 1V/Oct-Input. If I 
need two of them for one module I will have an precision adder in front 
of the module

Florian