Doepfer

Many, many thanks for this - exactly what I was looking for.

Best wishes.

Tim Burgess



> On 6 Feb 2018, at 00:55, Nicholas Keller maq163x2@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> 
> You might just need to replace the fuse
> 
> Confirm what PSU model you have and refer to this page:
> http://www.doepfer.de/faq/a100_faq.htm#Fuse <http://www.doepfer.de/faq/a100_faq.htm#Fuse>
> 
> 
> 
> On Feb 5, 2018, at 11:08 AM, 'Tim Burgess' tim@raisedbar.net <mailto:tim@raisedbar.net> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
> 
>>  
>> 
>> Hi,
>> 
>>  
>> 
>> I’ve been having some mail issues, so apologies if this has come through previously.
>> 
>>  
>> 
>> I have an LC9 case that is not receiving power when turned on. I’ve swapped the power cable out for the known good cable from my G6 case, but I still get no power to my modules. The case has been moved since the last time I used it – is it possible that a module’s connection is become partially-seated and this is preventing power-up? I’m a long way from anybody who could service the unit for me and I’m blind, so removing all of the modules and asking somebody to fit them for me again is something I want to avoid if a loose connection wouldn’t be a possible cause of the fault.
>> 
>>  
>> 
>> Any and all suggestions gratefully received.
>> 
>>  
>> 
>> Best wishes.
>> 
>>  
>> 
>> Tim Burgess
>> 
>>  
>> 
>> 
> 
>