Doepfer

Hi Diego,

It does sound like there might be a short between the adjacent modules. Can you check for that?

Thanks
John


> On 12 Jun 2018, at 08:57, yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Hello,
> 
> the A-138s is a very simple module (just a standard mixer circuit with
> operational amplifiers) and I have no idea how the signal could crosstalk to
> any other module.
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprungliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> > Gesendet: Montag, 11. Juni 2018 15:09
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Interferences from A-138s into LC6
> >
> >
> > Hello, I have a WMD buffered multiple which suffers from A-138s
> > mixer interferences, both powered by an LC6 Doepfer case. Is the
> > WMD faulty or its cable? A-138s output can be heard on the WMD,
> > unless knob's fully CCW. I also see that the multed signal is
> > louder that the original one. Any hint is welcome.
> >
> > Best regards,
> > Diego
> 
> 
>