Doepfer

Hello,

I'm sorry - no news so far. It's still in the holding pattern ...

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Freitag, 28. September 2018 10:39
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: AW: AW: [Doepfer_a100] Question regarding the A-126-2
>
>
>
>
>
> Hello Dieter,
> Is there any news on the new A-126-2 frequency shifter (combo) module?
> ---
>
> Greetings,
>
> 9-0-9
>
>
> On 2017-06-08 09:44, Neil Kagan nkagan@mac.com [Doepfer_a100] wrote:
>
> Understood!
>
> Thanks again,
>
> Neil
>
> Sent from my iPhone
>
> > On 8 Jun 2017, at 08:43, yahoo@doepfer.de [Doepfer_a100]
> <Doepfer_a100@yahoogroups.com> wrote:
> >
> > Yes, the sine/cosine outputs of the A-110-6 may be used. But as they are
> > derived by waveshaping from triangles the waveforms are not as
> perfect as
> > sine/cosine from VCOs with sine/cosine core. For best results
> I'd recommend
> > a VCO with sine/cosine core.
> >
> > Best wishes
> > Dieter Doepfer
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> >> Gesendet: Donnerstag, 8. Juni 2017 09:33
> >> An: Doepfer_a100@yahoogroups.com
> >> Betreff: Re: AW: [Doepfer_a100] Question regarding the A-126-2
> >>
> >>
> >> Ok thank you Dieter. I'll keep the blank panel in place for now
> >> then. Can I ask (this may be stupid!) as I have one of the new
> >> A-110-6 in order; will this also be a suitable VCO to use as a
> >> quadrature source?
> >>
> >> Neil
> >>
> >> Sent from my iPhone
> >>
> >>> On 8 Jun 2017, at 08:25, yahoo@doepfer.de [Doepfer_a100]
> >> <Doepfer_a100@yahoogroups.com> wrote:
> >>>
> >>> Neil,
> >>>
> >>> it's too early to specify the width as it will depend upon
> the features
> >>> included in the planned new frequency shifter module (i.e. built-in
> >>> quadrature VCO or connection for external VCO like
> >> A-110-4/A-143-9, built-in
> >>> squelch circuit with envelope follower and VCA ...).
> >>>
> >>> Best wishes
> >>> Dieter Doepfer
> >>>
> >>>> -----Ursprüngliche Nachricht-----
> >>>> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]
> >>>> Gesendet: Mittwoch, 7. Juni 2017 22:57
> >>>> An: Doepfer_a100@yahoogroups.com
> >>>> Betreff: [Doepfer_a100] Question regarding the A-126-2
> >>>>
> >>>>
> >>>> Hi Dieter,
> >>>>
> >>>> I have got to the point with my A-100 system where I am now close
> >>>> to running out of space. I am happy with its size and don't want
> >>>> it to grow further; however I am committed to leaving a space for
> >>>> the eventual release of the A-126-2. Could you let me know if you
> >>>> will be keeping it at 8HP?
> >>>>
> >>>> Many thanks,
> >>>>
> >>>> Neil
> >>>>
> >>>> ------------------------------------
> >>>> Posted by: Neil Kagan <nkagan@mac.com>
> >>>> ------------------------------------
> >>>>
> >>>>
> >>>> ------------------------------------
> >>>>
> >>>> Yahoo Groups Links
> >>>>
> >>>>
> >>>>
> >>>
> >>>
> >>>
> >>> ------------------------------------
> >>>
> >>> ------------------------------------
> >>>
> >>>
> >>> ------------------------------------
> >>>
> >>> Yahoo Groups Links
> >>>
> >>>
> >>>
> >>
> >>
> >> ------------------------------------
> >> Posted by: Neil Kagan <nkagan@mac.com>
> >> ------------------------------------
> >>
> >>
> >> ------------------------------------
> >>
> >> Yahoo Groups Links
> >>
> >>
> >>
> >
> >
> >
> > ------------------------------------
> >
> > ------------------------------------
> >
> >
> > ------------------------------------
> >
> > Yahoo Groups Links
> >
> >
> >
>
>
>
>
>