Doepfer

Hi Neil,

> ive checked the internal jumpers and these are in place but am at a 
> loss with what to do next.

I take you mean those in the middle of the busbar running across the 
back of the case(?). However there are other places these signals can 
be 'cut': on the A-190 by the bus conector there are two links which 
can be cut (page 4 of manual), and the A-140 has a separate jumper to 
disconnect it from the gate on the bus (also page 4 of its manual 
entry), but since you are not getting CV into the A-110s I'd suspect 
the former (there is no independent mechanism in the A-110 to 
disconnect it from the bus). Can't think of anything else at the 
moment, but I'm sure others will come to the rescue if there is...

Tim