it needs the trigger modifier!if you patch the start/stop output thru the voltage inverter you will have a 0 volts to -5 volts trigger... bakis. --- Joe Buechler <buechlerjoe@toadmail.com> wrote: > So you would patch the MCV24 Start/Stop through the > Trigger > Modifier to the A155 Reset? Or is it the Voltage > Inverter? > > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros > <synth_freak_2000@y...> wrote: > > > > > ----- Original Message ----- > > > From: "Dieter Doepfer" <hardware@d...> > > > To: "Bakis Sirros" <syrros@a...> > > > Sent: Tuesday, March 11, 2003 11:48 AM > > > > > > > > > > Hi Bakis, > > > > > > > > in one of your forum messages you wrote: > > > > > > > > ".... the mcv24 has a clock output but not a > reset > > > output that is > > > essentials for > > > > syncing the a100 sequencers.(the mcv24 has a > > > start/stop output that i > > > haven't > > > > use with any of the > > > > a100 modules.it may be of use with old drum > > > machines ...." > > > > > > > > The only difference between reset and > start/stop > > > is the polarity. > > > > > > > > Stop state: Reset = high, Start/Stop = low > > > > Running state: Reset = low, Start/Stop = high > > > > > > > > With the usage of a inverter you could use the > > > MCV24 to generate the reset > > > > signal too. > > > > > > > > The reason for both type of signals is > history: > > > Roland used the Start/Stop > > > > signal in the Roland Sync standard (high while > > > running, low during stop). > > > Other > > > > manufacturers used the reset signal (low while > > > running, high during stop). > > > > > > > > Dieter > > > > > > SORRY GUYS...DIETER KNOWS BETTER,THEN... :-)) > > BAKIS. > > > > > > > > > > > > > > > > > > ===== > > synthfreak(parallel worlds) > > athens-greece > > [Doepfer_a100] group owner-moderator > > > > __________________________________________________ > > Do you Yahoo!? > > Yahoo! Web Hosting - establish your business > online > > http://webhosting.yahoo.com > > ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner-moderator __________________________________________________ Do you Yahoo!? Yahoo! Web Hosting - establish your business online http://webhosting.yahoo.com
Message
Re: [Doepfer_a100] Re: Fwd: Fw: (CORRECTION FROM DOEPFER About THE SYNCING WITH THE MCV24!!!)
2003-03-11 by Bakis Sirros
Attachments
- No local attachments were found for this message.