Doepfer

The A155 as mentioned always resets to step 1 and starts at step 2.

Not sure what's causing the lag, but if you're using a software 
sequencer its possible that a lot of active sensing messages or other 
spurious midi messages are clogging the A190 processor a bit.

Joe

--- In Doepfer_a100@yahoogroups.com, "code_pig" <code_pig@y...> wrote:
> Actually, I have no problem with the A190-A155 combination.  I mean, 
> there is a slight lag (which I assume is down to the MIDI digital to 
> analog CV conversion), but the sequencer parks at step one, and 
> starts at step two.
> 
> The lag doesn't bother me much, and seeing as how I multitrack 
> things, I can offset the lag.
> 
> What is supplying the MIDI clock, and how is the clock being routed? 
 
> I'm certain you know this, but try never to supply timing critical 
> MIDI data via a THRU port.
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" 
<timothy@t...> 
> wrote:
> > Hi shm,
> > 
> > > I have been unable to get any kind of meaningful midi sync: yes 
> the 
> > > tempo is right, but the sequencer won't start on 1. The notes 
are 
> > 
> > I notice from the 'Database' section that this same problem is 
> > mentioned there, so I'm wondering whether it's one of those things 
> > one has to live with. I've just got hold of a 155 myself, and will 
> be 
> > looking at it over the next few days. I don't know whether I shall 
> be 
> > able to help out on the MIDI front (unless I can work out how to 
> get 
> > my PC to output some sort of MIDI clock, but I'm no musician), but 
> if 
> > I come up with anything I'll let you know.
> > 
> > > more likely to occur on, say, 1 and 73/960, etc.  So, I have 
been 
> > > recording midi notes at the desired rate to trigger the A-155 
off 
> > of 
> > > the gate output of the A-190. 
> > > 
> > > I would very much appreciate some tips on midi sync.  Thanks.
> > 
> > Again, I'm wondering if lack of response from other group members 
> who 
> > would have more idea than me, reinforces the above (?)
> > 
> > Tim