Doepfer

hi list,
i had a similar problem after moving my,then
small,a100 ,two years before.something got into one of
the external cv/audio input of my a155 and that step
didn't output any cv at all.after connecting a patch
cable and then removing the cable ,all was ok!
if we have these problems ,imagine what problems the
big jack modulars will have with their big holes....
bakis.


--- klamb000 <lamb@charter.net> wrote:
> Or, as in my case, the CV1 input need it's jack
> socket cleaned.
> 
> I had the same problem, and discovered that when I
> plugged a cable 
> into CV1, and then removed the cable, the problem
> disappeared... 
> until the next time.  I simply took the module out,
> cleaned and 
> adjusted the socket, and all is well.
> 
> Regards,
> Kevin
> 
> 
> --- In Doepfer_a100@yahoogroups.com, Florian
> Anwander 
> <Florian.Anwander@c...> wrote:
> > Hi peter 
> > 
> > > On my A100, the lfo & vclfo are causing the A110
> vcos to change 
> pitch (in
> > > time with the lfos) -10Hz which is annoying.
> > > Has anyone else had / fixed this?
> > This looks, like your powersupply is not powerful
> enough.
> > 
> > Florian
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner

__________________________________________________
Do you Yahoo!?
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com