Doepfer

Right if there was a meter module no LEDs would be needed here. I second
that so I vote against any LEDs just to propagate for a meter module.


----- Original Message ----- 
From: "Joe Buechler" <buechlerjoe@toadmail.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Thursday, May 29, 2003 3:42 PM
Subject: [Doepfer_a100] Re: Reading knobs problems...


> Hi Andreas
>
> > I rather just have the final result than the final effect shown
> > cause it it the actual output signal that we are going to feed to
> > other modules and no the factor, right?
>
> If we had a meter module, this discussion wouldn't even be necessary!
>
> It seems to me that whichever of the input or output voltage is NOT
> displayed will be mult'ed to something like an A170 for display
> anyway, so functionally it doesn't make much difference.
>
> Consistency with other modules, like the slew limiter and the voltage
> inverter, argue for displaying the output voltage. Also, Dieter claims
> this will be simpler, another good reason if that translates to lower
> cost.
>
> Joe
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>