--- Dieter Doepfer <hardware@doepfer.de> wrote: > From: "Dieter Doepfer" <hardware@doepfer.de> > To: "Bakis Sirros" <synth_freak_2000@yahoo.com> > Subject: low-cost digital multimeter suitable for > A-100 > Date: Fri, 4 Jul 2003 13:53:12 +0200 > > To all who are interested in a digital multimeter > suitable for A-100: > > The German electronic distributor Conrad > (www.conrad.de) offers a low-cost > digital multimeter (VC555) at 5.95 Euro (or even > 3.95 Euro for a limited > period). The advantage of this multimeter is the > size: 52 width x 95 height > x 26 thickness. The height is only 95 mm and this > means one could e.g. place > it on a A-100 blind panel e.g. by means of a > double-sided self-adhesive tape > or by screwing it to the panel. Normally multimeters > are much bigger. We > will never be able to offer a multimeter for the > A-100 at such a good price. > If there are sufficient inquiries we could ask our > front panel manufacturer > to manufacture a special blind panel with a > rectangle hole that fits to the > VC555 and a small hole for a 3.5 mm socket so that > one could measure each > A-100 signal. In this case the multimeter could be > placed behind the front > panel. But we would need at least 50 orders. Front > panels in smaller > quantities are too expensive due to the initial > programming and tooling > charges (same charges for 1, 50, 100 or 1000 front > panels). > > > Dieter Doepfer > ===== synthfreak(parallel worlds) athens-greece [Doepfer_a100] group owner __________________________________ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com
Message
Fwd: low-cost digital multimeter suitable for A-100(doepfer's suggestion...)
2003-07-04 by Bakis Sirros
Attachments
- No local attachments were found for this message.