Doepfer

hi pete,
all you have to do is add the current draw of each
module(mentioned in the doepfer site)and see that the
sum doesn't exceed the 650mA limit of the PSU.if this
isn't the case, then you may have a faulty PSU(maybe a
faulty regulator or anything else....)
better ask doepfer direct!
bakis.


--- peter davis <pete@flowers.demon.co.uk> wrote:
> Hi group.
> 
> On my A100 the pitch of the A110 oscillators are
> being wobbled by the LFOs.
> 
> .....So I've now measured the output of the power
> supply, and find indeed as
> bakis said that it's not strong enough, and is
> varying as the LFOs change.
> 
> It's a pretty standard A100 2 oscillator system,so I
> don't imagine any
> module would be drawing excess power unless it was
> faulty, and it's all
> working ok.
> 
> Do I need a separate PSU for the A110s? What can I
> do? Fiddling with the CV
> input jacks doesn't change anything. I'm a bit
> stuck.
> 
> Thanks
> 
> 
> Pete d
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner

__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com