Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Digest Number 642

2003-09-02 by Josue Arias

HI,

The Dp3200 is not being produced. It just routes signal from inputs to outputs, no AD/DA converters.
Best regards,

Josue.
  ----- Original Message ----- 
  From: mdimmm@hotmail.com 
  To: Doepfer_a100@yahoogroups.com 
  Sent: Tuesday, September 02, 2003 6:13 PM
  Subject: Re: [Doepfer_a100] Digest Number 642


  thanks everyone, and sorry for a slow reply.

  ideally, all the channels would run into the computer so i could insert dsp
  treatments into the signal path. but it would mean all the channels would be
  ad/da converted all the time. it would also be expensive (3 motu 896 units?)

  my computer is a powerbook g4 with max/msp software. in max/msp one can
  route inputs and outputs in any possible way with a virtual matrix, save
  presets, control everything with midi etc. and you could add digital
  treatments at any stage of the signal path. the connection to an interface
  would have to be via firewire or pcmcia card.

  this akai dp3200 you mention, are they still being produced? so this just
  routes inputs to outputs right, it doesn't run the signal into a computer
  (and doesn't convert a>d either)?

  i'm kind of not sure whether a midi controlled signal matrix or mixing and
  routing everything through the powerbook would be best at the moment

  thanks again
  mdimm


  > From: Doepfer_a100@yahoogroups.com
  > Reply-To: Doepfer_a100@yahoogroups.com
  > Date: 27 Aug 2003 13:29:58 -0000
  > To: Doepfer_a100@yahoogroups.com
  > Subject: [Doepfer_a100] Digest Number 642
  > 
  > Date: Wed, 27 Aug 2003 15:04:32 +0200
  > From: "Josue Arias" <josue@Audio24Bit.com>
  > Subject: Re: computer controlled A-100?
  > 
  > Hi People,
  > 
  > I have digital patch matrix AKAI DP3200, is 32 inputs and 32 outputs, fully
  > bufered so you can send several inputs to one output and viceversa. All under
  > MIDI control. It`s 3U rack with all in/outs in multipin format and I`m planing
  > to make a panel for my modular system with all in/outs in jack format. You can
  > also make some sort of wave sequencing with it and other fun experiments.
  > If anyone is really interested in this matrix, I could sell it, not cheap but
  > I`m open to offers.
  > 
  > Best regards,
  > 
  > Josue Arias.


        Yahoo! Groups Sponsor 
              ADVERTISEMENT
             
       
       

  To unsubscribe from this group, send an email to:
  doepfer_a100-unsubscribe@yahoogroups.com



  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


[Non-text portions of this message have been removed]

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.