Doepfer

> Plug the adaptor into the same bus board the A190 will be plugged 
> into.  The adaptor will feed the bus board 5V, and the bus board 
will 
> feed the A190.

... and make sure you insert it the right way - section 9.2 on page 
29 of the introductory section of the manual says to install it with 
the red mark at the bottom (that is, the same orientation as the red 
stripe on the normal ribbon connectors).

Tim

> --- In Doepfer_a100@yahoogroups.com, Chris Beck <jeancbeck@e...> 
> wrote:
> > Hello list,
> > 
> > I recently bought a A-190 MIDI/CV interface, which came with the 
5V 
> > adapter.
> > 
> > I am pretty ignorant when it comes to this stuff, so I must ask, 
> how 
> > exactly to I connect the adapter and module?  I've read that you 
> plug 
> > the adapter into the bus board.  Is that all?  Shouldn't it 
connect 
> > directly to the A-190?  Will it affect the other modules 
connected 
> to 
> > the same board?
> > 
> > Thanks!
> > - Chris