Doepfer

Hi and many many thanks for the help on this issue = )... Its good to know 
it will work...ahhhh I can't wait and again many many thanks for the answers 
I needed...

7



>From: Paul Schulz <dasfonk@web.de>
>Reply-To: Doepfer_a100@yahoogroups.com
>To: Doepfer_a100@yahoogroups.com
>Subject: Re: [Doepfer_a100] Hi question about power consumption
>Date: Mon, 29 Sep 2003 02:25:57 +0200
>
>Yo chorus72000, watch this:
>
>BS2:
>
>MODULE:                        current draw         subtotal
>------------------------------------------------
>2*A-110    VCO                 = 140 mA      | 140 mA
>1*A-114 Ring Mod             = 40 mA        | 180 mA
>1*A-115 Audio Divider       = 20 mA        | 200 mA
>1*A-116 Wave Processor   = 20 mA        | 220 mA
>1*A-118 Noize                   = 20 mA        | 240 mA
>1*A-120 Moog VCF          = 30 mA        | 270 mA
>1*A-121 Multimode VCF   = 30 mA        | 300 mA
>1*A-130 VCA lin                = 20 mA        | 320 mA
>1*A-131 VCA log              = 20 mA        | 340 mA
>1*A-138a Mixer lin             = 10 mA         | 350 mA
>1*A-138b Mixer log            = 10 mA        | 360 mA
>2*A-140 ADSR                  = 40 mA        | 400 mA
>1*A-145 LFO 1                  = 30 mA        | 430 mA
>1*A-146 LFO 2                  = 20 mA        | 450 mA
>1*A-148 S&H                    = 20 mA        | 470 mA
>1*A-160 Clk Divider          = 40 mA         | 510 mA
>1*A-161 Clk Sequencer     = 20 mA         | 530 mA
>1*A-170 Slew Limiter        = 20 mA          | 550 mA
>1*A-180 Multiples              = 0 mA           | 550 mA
>1*A-190 Midi-CV              = 60 mA         | 610 mA  total current draw
>
>-BS2 without A-130 (or A-131): 590 mA
>-and then with an additional A-112: 640 mA
>So it will work if you remove one VCA.
>
>And by the way: If your modules consume more than 650mA, then not only
>will your A-112 be "underpowered", but the whole system. Unstable VCOs
>(A-110s) will be the cause (as happened in my sytem when the modules
>consumed round 670mA)
>
>cheers,
>Paul
>
>
>chorus72000 wrote:
>
> > Hi... Question for all of you. I have a Basic System 2 and I'm
> > looking to buy a 112 (sample module)to put in it...Now the question
> > is, can I take out a VCA and put in the 112 instead or is there a max
> > amount of total power allowed in a system ( ie: 112 is 50mA's and the
> > VCA is only 20mA's ) so will my 112 be underpowered? thanks in
> > advance...
> >
> > 7
>
>
>

_________________________________________________________________
High-speed Internet access as low as $29.95/month (depending on the local 
service providers in your area). Click here.   https://broadband.msn.com