Doepfer

Hi Julian,

Electrically HBB15-1.5A will work fine, its a lower noise PSU than 
standard Doepfer item - just don't forget to adjust the two presets 
on psu to give +/- 12V before connecting any modules, as it is 
factory preset for +/- 15V. Problem you may have is with depth, as 
case you're suggesting doesn't look very deep. The HBB15 is 74mm 
deep - I've mounted one into a standard doepfer 6U case, but I had 
to take it out of its frame, turn the pcb through 90 degrees and fix 
the power transistors to the case back panel to squeeze it in.

If you're in the UK try Farnell for the eurocard frames you need to 
mount the modules, order code 418-2078 should work, made by Schroff, 
it's 175mm deep, 3U 84hp frame (£35.17), or of you want to make your 
own 19" rack ears then use 84 hole tapped strip code 208-437 (£2.47) 
with front cross rails 461-842 (£6.36)

Cheers,
Allan

Cheers,
Allan--- In Doepfer_a100@yahoogroups.com, "Julian" <julian@2...> 
wrote:
> The powerone HBB15-1.5-A looks like a nice power supply to use for 
this.  It
> gives +/- 12v at 1.7 amps.  Im thinking this would be a nice 
ammount of
> power to supply 12u worth of doepfer modules...
> 
> I realise 1700 milliamps wouldnt be the best idea in a short 
circuit, but
> other then this, can anyone see why this psu wouldnt be suitable?
> 
> Now i just need to find some mounting rails...
> 
> 
> Cheers, julian.