dieter says: "We will probably include the LEDs in the A-101-2 and -3 too. But the A-101-1 is the only module that already exists as prototype and where we could test the additional LEDs. We are a bit conservative with promises we may not keep. For the A-101-2 the additional LED should be no problem (as only 2 vactrol LEDs in connected series and a third LED as for the A-101-1 should be no problem). But we are not sure if it will work with the A-101-3 as 6 serial vactrols are used and a seventh LED may cause troubles due to the LED voltage as the total for all LED voltages cannot go beyond 12V due to technical reasons of the logarithmical LED current source used in the A-101-3. Maybe even the 6 vactrol LEDs will cause problems and we will have to add the circuit. We will see. If it is no problem of course we will add the LED for the A-101-3." ===== Bakis Sirros Parallel Worlds / Polariton Athens-Greece [Doepfer_a100] group owner http://www.rubber.gr http://www.ward12.com __________________________________ Do you Yahoo!? Protect your identity with Yahoo! Mail AddressGuard http://antispam.yahoo.com/whatsnewfree
Message
doepfer's comments about indicating frontpanel leds on the three vactrol modules.
2003-11-06 by Bakis Sirros
Attachments
- No local attachments were found for this message.