Doepfer

--- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
<synth_freak_2000@y...> wrote:
> 
> --- Dieter Doepfer <hardware@d...> wrote:
> > From: "Dieter Doepfer" <hardware@d...>
> > To: "Bakis Sirros" <synth_freak_2000@y...>
> > Subject: Please forward ...
> > Date: Thu, 27 Nov 2003 18:05:13 +0100
> > 
> > > hmm no, my module doesn't react this way.
> > > giving +1v into the module, i get a -0,45v output
> > and
> > > the leds are off. normally i should get +1v, when
> > all the leds
> > > are off, right?
> > 
> > No. Both LEDs off (= manual control about middle
> > position and no CV) means
> > approx. 0V, i.e. ~no amplification.
> > The LEDs correspond to the amplification. Right LED
> > fully bright =
> > amplification +5, left LED fully bright = -5. Both
> > LEDs off ~ 0.
> > 
> > I hope the German manual will be ready tomorrow and
> > I hope this will clear
> > up the behaviour of the module.

ok, i got it. thanks for the explanation.

the a196 manual will come this week too?
i really start to fall in love with the pll.
i tried it together with an a110, a119, a171, a107
and a147, such a wild sounding beast :-)

best wishes

ingo