Doepfer

> -----Ursprüngliche Nachricht-----
> Von: ALMAGATA@telefonica.net [mailto:josue@Audio24Bit.com]
> Gesendet: Samstag, 29. November 2003 12:01
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] More comments on Doepfer VCOs 110 vs 111
>
>
> Hi People,
>
> I was testing both VCOs on scope and I noticed the SAW from 110 and 111
> are reversed: the 111 have a ramp instead of a saw wave so the printed
> graphic of the front panel is not corresponding with the wave out.
> Anyone noticed this "fault"?

For the human ear there is no difference between rising and falling saw.
Simply try to insert a voltage inverter into an audio signal. You will hear
no difference. But you are right, the labelling is wrong (but after more
than 5 years you are the first customer who noticed that "fault".

Best wishes
Dieter Doepfer