Doepfer

hi roel,
well,there is no secret...i don't know what you mean...??as for the 
linear/exponential thing,i use lin.mixers for cv's and exp.mixers for 
audio AND cv's...they work fine!!i think the only difference is that 
due to the different pontesiometers in each mixer module,the 
exp.mixer is better for audio signals...but,it will,also,work fine 
with cv's...the same aplies to the exp.vca/lin.vca!!i use them both 
for audio and cv's!!the difference??the same as the mixers...
and,as for the leds...let's say that they have a colour between red 
and orange,o.k.??
synthfreak








-- In Doepfer_a100@y..., "Roel Steverink" <roel.steverink@1...> wrote:
> From:  bakis Sirros <synth_freak_2000@y...> 
> Date:  Fri Jan 18, 2002  12:24 pm
> Subject:  Re: [Doepfer_a100] Variable level waveform output on VCO
> 
> Bakis wrote:
> 
> hi roel,
> >i'm not sure what you mean...you can have variable
> >level for each waveform by using a mixer after the
> >vco!!!also,what do you mean by"...
> 
> So you mean plugging the waveform right into the input of the input 
from the mixer. Is there a difference of using the exponential or the 
linear one. I once used the linear one and all of sudden I could 
really mix the sounds on two outputs, it completely changed. I never 
have found that again. Please, tell me the secret. 
> 
> >A switch between
> >octave and semitones on it as well!..."a switch for
> >octaves already exists...
> synthfreak
> 
> Yes, I mean on the moog modular Oscilator driver, you had a switch 
for switching between octaves and semitones! 
> 
> >p.s.:i was speaking to dieter doepfer the other day
> >and he reffered to the a100 modules leds as"RED
> >LEDS",so...i'm not gonna tell you 'told you so..."
> 
> That funny, Bakis, after finally agreeing that I was right, no 
still believe all of the them are red! I still looking at orange 
lights, cause I have enough red ones around me to prove that it's 
orange! 
> 
> Roel.
> 
> 
> 
> [Non-text portions of this message have been removed]