dieter says: "We will update the front panel pictures of the Vactrol modules as we added the diplay LED to each Vactrol module. I have to point out that the photoresistor inside the vactrol is much more sensitive than the LED/human eye combination - even if we use low current LEDs. So you will hear a sound change of the vactrol module in question while the LED still seems to be dark. For details we will publish the graph that shows the connection between LED current and resistor change. The graph shows that the resistors change much before the eye is able to see anything - at least under normal illumination conditions. This does not really surprise as the vactrols are completely shielded against external light and consequently the react even to minimal illuminations that the human eye cannot detect in a normal lighting environment. b.t.w. We also think about a general Vactrol module that has the resistor of the vactrol as output and a control voltage + manual control as input (like A-101-X). It would be a little bit a DIY-ish module as it requires to solder the vactrol output across the variable resistor of the circuit in question. The vactrol output (= variable resistor) could be used to replace (or switched in parallel) each potentiometer that is used as a variable resistor in any circuit. This would enable voltage control of all such parameters as the resistance of the vactrol changes from a few hundret Ohm up to some MOhm. Some examples in the A-100: Vactrol based VC trigger delay (A-162), VC Attack or Decay or Release (A-140), VC Slew Limiter (A-170), VC Trautonium filter (A-104), VC Random (A-118) and many more (for some of these examples of course the VC version of the module is available too). But even external devices could be controlled as the vactrol output is completely isolated from the control circuitry - provided that a variable resistor is used to control the parameter in question. A lot of Moogs, Korgs, and so on could be expanded by voltage controlled features like VC LFO, VC Envelope Generators, VC Slew/Glide devices and many more. Of course not a module for everybody as you have to be a bit experienced with electronics to combine the vactrol output of the module with the device in question. But it's only an idea and all the other announced modules have a higher priority." ===== Bakis Siros Parallel Worlds / Polariton Athens-Greece [Doepfer_a100] group owner http://www.rubber.gr http://www.ward12.com __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus
Message
more info on vactrol modules from doepfer.
2004-01-13 by Bakis Sirros
Attachments
- No local attachments were found for this message.