Doepfer

I can deal with that factor.  The disadvantage of the A110 for me is the
smaller range of the tuning knob.  A knob that delivers less than 12
semitones of range isn't practical for my purposes.  If I had the talent
to swap the pot, I would (I'm solder-challenged).  Mostly I use my
A111s.

> -----Original Message-----
> From: mritenburg [mailto:mritenburg@yahoo.com] 
> Sent: Thursday, June 10, 2004 10:19 AM
> To: Doepfer_a100@yahoogroups.com
> Subject: [Doepfer_a100] Re: tuning
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "omegaattraktor" 
> <omegaattraktor@n...> wrote:
> > hello list,
> > i noticed my a110 und a111 don't have exactly the same scale. when
> > playing over more than 3 octaves the difference becomes audible. is 
> > there a tuning procedure for the oscillators? or is this just the 
> > normal drift?
> 
> It's called tracking.  It's known that the A110 does not track as 
> well as the A111.  Thats why the A111 is known as the "High End" 
> oscillator. When you set the range switch for the A110 and tune it, 
> you pretty much have that octave, the octave above and the octave 
> below, your milage my vary.  If you need to be in other octaves, you 
> need to set the range switch and tune again.
> 
> Don't get me wrong, I use the A110s all the time, but, if you are 
> looking for stable tracking over multiple octaves, there are better 
> choices than the A110.
> 
> Matthew
> 
> 
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor 
> --------------------~--> 
> Check out Music Videos, Internet Radio, Artist Photos, Music 
> News! LAUNCH Music on Yahoo! 
> http://us.click.yahoo.com/Wkrq7C/JARHAA/n1hLAA/QnLolB/TM
> 
> --------------------------------------------------------------
> ------~-> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
>