Doepfer

> > btw: If anyone in the group is familiar with the
> > ARP2600 ADSR gate/trigger
> > inputs I would be glad about a tip how to trigger
> > the ARP from a gate
> > signal. As far as I know the ARP ADSR requires both
> > gate and trigger. Has
> > anyone tried to derive the trigger from the gate
> > signal with a simple
> > capacitor to control the ARP ADSR? We have a
> > customer who wants to control
> > his ARP ADSR from a MCV4. I have no ARP available to
> > check out if a simple
> > capacitor (and maybe a pull down resistor) does the
> > job. If anyone has
> > experience with the ARP ADSR please let me know.

I own an Arp 2600 and you can trigger the ADSR by running a gate OR 
trigger into the S/H gate instead of into one of the gate/trigger 
inputs.  That S/H gate jack is in the same basic location as the 
gate/trigger jacks, just with selection switch down if you know what 
I mean. You can send the same gate to the external clock in of the 
S/H on the Arp 2600 to have all patches in "SYNC."

I hope that helps,

Matthew