Doepfer

Analogue Solutions, Analogue Systems and Deopfer all use 
CLIFF jacks - they are the manufacturer.  Moog also uses them, 
but in 1/4 inch, not 3.5mm.

The problems that probably most of use have seen with these 
jacks was due to a design issue that Cliff has since corrected.  
Most of the D and A. Sys modules shipped in the ast year have 
already had these new jacks installed.

Until recently, these jacks weren't availible in te US piece parts, 
but CLIFF USA (in the bay area) has got them.

 



--- In Doepfer_a100@yahoogroups.com, "ps_minor" 
<pscottm@h...> wrote:
> thanks for thie info.  who is cliff?  
> 
> i have 3 Asys module jacks that need to be replaced.  
> 
> cheers, -psm
> 
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "(i think you can figure 
that out)" <peter@b...> 
> wrote:
> > Doepfites,
> > 
> > I got a handful of the new and improved jacks from Cliff last 
week 
> > to replace the older design inherent  in my D and A. Sys 
modules 
> > that in some cases had become problematic.
> > 
> > There are definite differences to the spring tension and while 
it 
> > makes for a slightly less smooth insertion 'clunk' , I'm pretty 
> > confident these new guys will go the distance.   I recommend 
> > them to anyone who's current jacks may be failing.
> > 
> > - P