Two questions: - Could you characterize in a few words what that design issue is that they've corrected? And - How difficult is it to swap the jacks, i.e. time required, skill involved? > -----Original Message----- > From: (i think you can figure that out) > [mailto:peter@buzzclick-music.com] > Sent: Thursday, June 17, 2004 11:43 AM > To: Doepfer_a100@yahoogroups.com > Subject: [Doepfer_a100] Re: Replacement jack - CLIFF > > > Analogue Solutions, Analogue Systems and Deopfer all use > CLIFF jacks - they are the manufacturer. Moog also uses them, > but in 1/4 inch, not 3.5mm. > > The problems that probably most of use have seen with these > jacks was due to a design issue that Cliff has since corrected. > Most of the D and A. Sys modules shipped in the ast year have > already had these new jacks installed. > > Until recently, these jacks weren't availible in te US piece parts, > but CLIFF USA (in the bay area) has got them. > > > > > > --- In Doepfer_a100@yahoogroups.com, "ps_minor" > <pscottm@h...> wrote: > > thanks for thie info. who is cliff? > > > > i have 3 Asys module jacks that need to be replaced. > > > > cheers, -psm > > > > > > > > > > --- In Doepfer_a100@yahoogroups.com, "(i think you can figure > that out)" <peter@b...> > > wrote: > > > Doepfites, > > > > > > I got a handful of the new and improved jacks from Cliff last > week > > > to replace the older design inherent in my D and A. Sys > modules > > > that in some cases had become problematic. > > > > > > There are definite differences to the spring tension and while > it > > > makes for a slightly less smooth insertion 'clunk' , I'm pretty > > > confident these new guys will go the distance. I recommend > > > them to anyone who's current jacks may be failing. > > > > > > - P > > > > ------------------------ Yahoo! Groups Sponsor > --------------------~--> > Create your own customized LAUNCHcast Internet Radio station. > Rate your favorite Artists, Albums, and Songs. Skip songs. > Click here! http://us.click.yahoo.com/5ddjqC/xA5HAA/n1hLAA/QnLolB/TM > -------------------------------------------------------------- > ------~-> > > > Yahoo! Groups Links > > > > > >
Message
RE: [Doepfer_a100] Re: Replacement jack - CLIFF
2004-06-17 by unknown freak
Attachments
- No local attachments were found for this message.