Doepfer

Honestly,...it doesn't matter (read:  your call).  One minimum 
(yuck yuck) - two would give you the ability for a double-fat kind of 
thing.

I have two, both on vectorboard (no PCB) and like that I'm able to 
double voices.

- Peter


--- In Doepfer_a100@yahoogroups.com, "unknown freak" 
<vogelscheiss@v...> wrote:
> How many of these (i.e. the model for these) do you keep in 
your system?
> Would at least two be ideal to make the most of them?
> 
> > -----Original Message-----
> > From: (i think you can figure that out) 
> > [mailto:peter@b...] 
> > Sent: Monday, June 28, 2004 2:16 PM
> > To: Doepfer_a100@yahoogroups.com
> > Subject: [Doepfer_a100] New Product Announcement: VCO
> > 
> > 
> > Based on interest expressed from your letters (thank you!) 
and 
> > after speaking with Dieter and getting the thumbs up to 
produce 
> > my VCO, it looks I'm going to do just that in a limited quantity.  
> > 
> > These will be marketed under the company name 'Plan B' 
and 
> > will be in Doepfer height, 90mm wide (45HP), will use the 
same 
> > jacks as Doepfer but with the soft touch knobs used by 
Analogue 
> > Systems.  The will run on either +/112 or +/-15 and will use 
> > Doepfer's 16 pin dual in line power configuration on the 
PCBs. 
> > For a general idea of what this VCO will look like, go here:
> > 
> > http://www.buzzclick-music.com/Doepfer_rendered2.jpg
> > 
> > I'm going to d a maximum of 25 pieces, but will need a 
minimum 
> > of a 10 piece order to go forward with this.
> > 
> > Price:  $200.00. 
> > 
> > Payment:  50% down, 50% plus shipping (FOB Los Angeles, 
CA) 
> > on completion prior to shipment.  Paypal is preferred, money 
> > orders accepted, please no cash or cpersonal checks.
> > 
> > Schedule:
> > 
> > I am not by any means even close to a large scale 
manufacturer.  
> > I am requesting 50% down so that the components may be 
> > purchased and the faceplates and PCBs can be produced. I 
> > have about a week's worth of finalization to do on the design 
to 
> > get it to production status.  Once this happens and orders 
are 
> > received, I will purchase the raw materials and we can expect 
4 
> > weeks from that date for delivery of the PCBs and faceplates.  
I 
> > will need approx 1 day per unit for assembly, testing and 
> > calibration after that.  I apologize for the way I have to 
> > handle this, 
> > but again - I'm not a large scale manufacturer!
> > 
> > These will come with a 1 year warranty for anomalies caused 
by 
> > manufacturing.  Damage due to misuse must be billed, but 
at 
> > only a $25 surcharge during the first year (not including 
parts).
> > 
> > I AM NOT TAKING ORDERS YET!  I do ask that you contact 
me 
> > offline to determine the demand for this module and if it 
warrants 
> > going into production.  During this time I'll be working on the 
> > design finalization.
> > 
> > You can get me at peter@b...
> > 
> > Due to the complexity of this assemnby I will not be able to 
sell 
> > bare PCBs at this time.  This VCO incorporates a 
> > heat-conductive epoxy encaspulated sub module for 
> > temporature stability and both through hole and SMT 
> > components - it's a tricky assembly process.  
> > 
> > So let me know if you're interested and thanks again for 
> > expressing interest in this instrument.
> > 
> > Features:
> > 
> > Controls:
> > 
> > Freq
> > Fine Freq
> > Freq VC1 attenuation
> > Freq VC1 attenuation
> > FM level
> > Wave Morph
> > Pulse Width
> > 
> > Jacks:
> > 
> > Outputs:
> > 
> > Sine out
> > Triangle out
> > Saw out
> > PWM out
> > Morph out
> > 
> > Inputs:
> > 
> > Freq VC 1
> > Freq VC 2
> > FM in
> > 1v/oct in
> > Sync
> > Wave Morph VC
> > 
> > Switches:
> > 
> > Wave Morph Wave B select
> > 
> > General Specs:
> > 
> > Frequency range:  5 to 20K hertz
> > Fine Freq range:  20 hz
> > 2 bipolar control voltage inputs (full + and - processing)
> > Expo FM
> > Manual and VC crossfade WaveMmorphing from Sine to 
either 
> > Saw or Square
> > Manual and VC PWM
> > One 1 volt/octave input
> > 
> > best,
> > 
> > Peter Grenader
> > (now of Plan B!)
> > 
> > 
> > 
> > ------------------------ Yahoo! Groups Sponsor 
> > --------------------~--> 
> > Check out Music Videos, Internet Radio, Artist Photos, Music 
> > News! LAUNCH Music on Yahoo! 
> > 
http://us.click.yahoo.com/Wkrq7C/JARHAA/n1hLAA/QnLolB/TM
> > 
> > --------------------------------------------------------------
> > ------~-> 
> > 
> >  
> > Yahoo! Groups Links
> > 
> > 
> > 
> >  
> > 
> >