Doepfer

hi Peter, 
I'm in for at least one... would like two, but just put a deposit on the new EH 16 sec delay.... so not sure I can afford two now... too many new toys!
best,
phil


> Based on interest expressed from your letters (thank you!) and 
> after speaking with Dieter and getting the thumbs up to produce 
> my VCO, it looks I'm going to do just that in a limited quantity.  
> 
> These will be marketed under the company name 'Plan B' and 
> will be in Doepfer height, 90mm wide (45HP), will use the same 
> jacks as Doepfer but with the soft touch knobs used by Analogue 
> Systems.  The will run on either +/112 or +/-15 and will use 
> Doepfer's 16 pin dual in line power configuration on the PCBs. 
> For a general idea of what this VCO will look like, go here:
> 
> http://www.buzzclick-music.com/Doepfer_rendered2.jpg
> 
> I'm going to d a maximum of 25 pieces, but will need a minimum 
> of a 10 piece order to go forward with this.
> 
> Price:  $200.00. 
> 
> Payment:  50% down, 50% plus shipping (FOB Los Angeles, CA) 
> on completion prior to shipment.  Paypal is preferred, money 
> orders accepted, please no cash or cpersonal checks.
> 
> Schedule:
> 
> I am not by any means even close to a large scale manufacturer.  
> I am requesting 50% down so that the components may be 
> purchased and the faceplates and PCBs can be produced. I 
> have about a week's worth of finalization to do on the design to 
> get it to production status.  Once this happens and orders are 
> received, I will purchase the raw materials and we can expect 4 
> weeks from that date for delivery of the PCBs and faceplates.  I 
> will need approx 1 day per unit for assembly, testing and 
> calibration after that.  I apologize for the way I have to handle this, 
> but again - I'm not a large scale manufacturer!
> 
> These will come with a 1 year warranty for anomalies caused by 
> manufacturing.  Damage due to misuse must be billed, but at 
> only a $25 surcharge during the first year (not including parts).
> 
> I AM NOT TAKING ORDERS YET!  I do ask that you contact me 
> offline to determine the demand for this module and if it warrants 
> going into production.  During this time I'll be working on the 
> design finalization.
> 
> You can get me at peter@buzzclick-music.com
> 
> Due to the complexity of this assemnby I will not be able to sell 
> bare PCBs at this time.  This VCO incorporates a 
> heat-conductive epoxy encaspulated sub module for 
> temporature stability and both through hole and SMT 
> components - it's a tricky assembly process.  
> 
> So let me know if you're interested and thanks again for 
> expressing interest in this instrument.
> 
> Features:
> 
> Controls:
> 
> Freq
> Fine Freq
> Freq VC1 attenuation
> Freq VC1 attenuation
> FM level
> Wave Morph
> Pulse Width
> 
> Jacks:
> 
> Outputs:
> 
> Sine out
> Triangle out
> Saw out
> PWM out
> Morph out
> 
> Inputs:
> 
> Freq VC 1
> Freq VC 2
> FM in
> 1v/oct in
> Sync
> Wave Morph VC
> 
> Switches:
> 
> Wave Morph Wave B select
> 
> General Specs:
> 
> Frequency range:  5 to 20K hertz
> Fine Freq range:  20 hz
> 2 bipolar control voltage inputs (full + and - processing)
> Expo FM
> Manual and VC crossfade WaveMmorphing from Sine to either 
> Saw or Square
> Manual and VC PWM
> One 1 volt/octave input
> 
> best,
> 
> Peter Grenader
> (now of Plan B!)
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
>