Doepfer

hello guilherme,

wonderful that the files helped a bit.
maybe i can do some more examples, but i
actually use the phaser in a patch and
i have to finish the track before i can
do other things with it.
i hope to finish the track this weekend,
so probably next week i can do some more
examples with the a101-3.

best wishes

ingo


--- In Doepfer_a100@yahoogroups.com, "Guilherme da Luz" <gdaluz@n...> 
wrote:
>  Hi Ingo
>  Thank you! Your examples helped me to complete clarify the essence 
of
> this phaser now the key is experiment.
>       Musical wishes
>       Guilherme
> 
> -----Original Message-----
> From: selfoscillate [mailto:synaptic_music@y...] 
> Sent: sexta-feira, 2 de Julho de 2004 8:14
> To: Doepfer_a100@yahoogroups.com
> Subject: [Doepfer_a100] vactrol phaser example
> 
> 
> hello list,
> 
> despite the things i wrote yesterday, i had some time
> to do a patch with the vactrol phaser. it may be a bit
> unusual soundwise, but i had so little time. maybe next
> week i can do some more typical things with it.
> 
> 
> 1.
> 
> first i created a synth line with the following modules:
> 2x a111, 1x a138, 1x a185, 1x a131, 1x a142, 1x a145,
> 1x a102, 2x a155, 1x a154, 1x a156
> 
> nothing special here i guess. this is the sequence
> without the phaser.
> 
> http://www.selfoscillate.de/a100files/nophaser-cut.mp3
> 
> 
> 2.
> 
> this sequence is then used to feed the vactrol phaser
> in "6-stage mode", this means that only half of the module
> is used. an a147 lfo (which is controlled by an a155)
> is used to shift the phase. also a bit of positive
> feedback is applied.
> 
> http://www.selfoscillate.de/a100files/phaser6pole-cut.mp3
> 
> 
> 3.
> 
> ok, now we are leaving the standard. the stage 4 output
> is patched into an a137 wave multiplier. the a137 output
> is going into an a132 vca, which is modulated by an
> a147 lfo (the same one which sweeps the phase).
> the a132 output is then patched back into the
> feedback 1 input.
> 
> http://www.selfoscillate.de/a100files/phaserfeed1-cut.mp3
> 
> 
> 4.
> 
> now a second feedback loop is applied.
> stage 2 output is patched into the feedback 6 input,
> which emphasizes the higher frequencies a bit.
> 
> http://www.selfoscillate.de/a100files/phaserfeed2-cut.mp3
> 
> 
> ok, thats all for now. i'll be back on monday.
> 
> best wishes
> 
> ingo
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links