if someone is interested in sound examples of a specific module, just request them here. if i can find the time (no guarantee) i'll record them and post the links here. best wishes ingo --- In Doepfer_a100@yahoogroups.com, David Salter <david.salter@r...> wrote: > Ingo, > > Nice one. Good to hear a couple of the modules on my wish list. > > many thanks > > David > > > > David Salter > Reuters Ltd > UKI Project Management > Tel. +44 207 542 2402 > Fax. +44 207 542 2699 > Email. david.salter@r... > Reuters Messaging. david.salter.reuters.com@r... > > -----Original Message----- > From: selfoscillate [mailto:synaptic_music@y...] > Sent: 06 September 2004 06:56 > To: Doepfer_a100@yahoogroups.com > Subject: [Doepfer_a100] sound examples > > > > hello list, > > here are some of the requested sound examples. > all files are 110 bpm and they should also > work as loops. > > for all the examples the same sequence was used. > the pulse wave of an a111 vco is the audio source. > the end of the signal chain is an a131 vca, controlled > by an a140 adsr. the different patches had different > output volumes. therefore the output level of the vca > was re-adjusted on each patch. > > this is the a111 pulsewave output: > > http://www.selfoscillate.de/a100files/osc+vca.mp3 > > > then the modules in question were patched between > the vco and the vca. > > > a101-3 vactrol phaser, modulated by an a147 lfo (triangle). > example 1 is a 6-stage patch with simple lfo modulation. > example 2 is the same as example 1, but in 12-stage mode. > example 3 is a 6-stage-patch with a more complex lfo > modulation (vco pitch cv modulates the lfo frequency). > example 4 is the same as example 3, but in 12-stage mode. > example 5 is the same as example 4, but the lfo modulation > is inverted for the vactrols 7 - 12. > > http://www.selfoscillate.de/a100files/a101-3-take-1.mp3 > http://www.selfoscillate.de/a100files/a101-3-take-2.mp3 > http://www.selfoscillate.de/a100files/a101-3-take-3.mp3 > http://www.selfoscillate.de/a100files/a101-3-take-4.mp3 > http://www.selfoscillate.de/a100files/a101-3-take-5.mp3 > > > > a102 diode filter, with different settings for level and > resonance, cutoff modulated by an a145 lfo (triangle). > on the examples 2, 3 and 4 the filter cutoff was > additionally controlled by the vco pitch cv (keytracking): > > http://www.selfoscillate.de/a100files/a102-take-1.mp3 > http://www.selfoscillate.de/a100files/a102-take-2.mp3 > http://www.selfoscillate.de/a100files/a102-take-3.mp3 > http://www.selfoscillate.de/a100files/a102-take-4.mp3 > > > > a107 morphing filter in different modes: > example 1 is filter mode 04 (12db low + 6db high), with > keytracking and lfo modulation (triangle) on the cutoff, > resonance is close to self-oscillation. > example 2 is the same as example 1, but in filter mode 21, > which is a 6db highpass. > example 3 is the same as example 1, but in filter mode 16 > (lowpass + notch 2) and without lfo modulation. > example 4 is a morph between 7 filtermodes, going from > mode 26 to 32 and back, without any other modulation > (fixed cutoff), but with maximum input level and maximum > resonance. > > http://www.selfoscillate.de/a100files/a107-take-1.mp3 > http://www.selfoscillate.de/a100files/a107-take-2.mp3 > http://www.selfoscillate.de/a100files/a107-take-3.mp3 > http://www.selfoscillate.de/a100files/a107-take-4.mp3 > > > > a108 48db lowpass with a101-3 vactrol phaser patched > into the a108 feedback loop. keytracking is used on both a108 > and a101-3. the 24db lowpass output of the a108 is fed into > the a101-3 audio input. the a101-3 output for stage 4 is > fed back into the a108 resonance input jack. the 48 db > lowpass output is used as audio output for the final vca. > during recording the polarizer 1 on the a101-3 was turned > from "fully counter clockwise" (negative feedback) to > "fully clockwise" (positive feedback). > > http://www.selfoscillate.de/a100files/a108-a101-3-take-1.mp3 > > > > a133 polarizer, used to modulate the vco waveform. > the vco pulsewave is fed into the audio input of the a133. > the vco sinewave is fed into the cv input of the polarizer. > during recording the a133 cv attenuator was turned from > "fully counter clockwise" to "fully clockwise". > > http://www.selfoscillate.de/a100files/a133-take-1.mp3 > > > > a196 pll, patched between vco and vca, with the following > settings: > offs=5, range=mid, type=2, lowpass freq=2 > > http://www.selfoscillate.de/a100files/a196-take-1.mp3 > > > > ok, thats all for now. i don't think that detailed parameter > settings > are really necessary for these examples. anyway, if somebody is > interested in more details, please contact me via email. > > best wishes > > ingo > > > > > > > Yahoo! Groups Sponsor > ADVERTISEMENT > > <http://us.ard.yahoo.com/SIG=129rs9fam/M=273541.4247512.5496808.224846 7/ > D=grplch/S=1705032144:HM/EXP=1094536620/A=2061551/R=0/SIG=11sr5b9n1/*h tt > p://launch.yahoo.com/artist/videos.asp?artistID=1001301> > > <http://us.adserver.yahoo.com/l? M=273541.4247512.5496808.2248467/D=grplc > h/S=:HM/A=2061551/rand=901375042> > > > _____ > > Yahoo! Groups Links > > > * To visit your group on the web, go to: > http://groups.yahoo.com/group/Doepfer_a100/ > > * To unsubscribe from this group, send an email to: > Doepfer_a100-unsubscribe@yahoogroups.com > <mailto:Doepfer_a100-unsubscribe@yahoogroups.com? subject=Unsubscribe> > > * Your use of Yahoo! Groups is subject to the Yahoo! Terms > of Service <http://docs.yahoo.com/info/terms/> . > > > > > ----------------------------------------------------------------- > Visit our Internet site at http://www.reuters.com > > Get closer to the financial markets with Reuters Messaging - for more > information and to register, visit http://www.reuters.com/messaging > > Any views expressed in this message are those of the individual > sender, except where the sender specifically states them to be > the views of Reuters Ltd. > > > > [Non-text portions of this message have been removed]
Message
Re: sound examples
2004-09-06 by selfoscillate