Doepfer

I'm afraid I don't have a digital camera, but I'll try and borrow one.  
The plan I used came off the following site:

http://www.angelfire.com/music5/a100/sounds/DIYmodules/DO
C1.html

I just squeezed two attenuators onto the one panel.  It all fits 
quite nicely as long as you use the mini (17mm) pots (I got mine 
from Maplins).  As per the plan, I used 10K pots and a 1K static 
resistor.  I have to admit, I don't really understand the reasoning 
for these values, as I blindly followed the plan.  Works fine 
though.  It is perfect for turning down the output on the LFO2 (and 
the sine wave on my A Sys LFO).  All together, it cost around £10 
($18) and it took about 3 1/2 hours (including drilling out the 
blank panel.  That's as a complete beginner).  I just want to 
make more modules, now.  Any ideas, anyone?

Stuadh

--- In Doepfer_a100@yahoogroups.com, "levka0" <levka@d...> 
wrote:
> Hi Stuadh
> Can you upload some pics of this ?
> What potmeter values did you use ?
> 
> kind regards
> Joost
> 
> --- In Doepfer_a100@yahoogroups.com, "stuadh" 
<stuadh@h...> wrote:
> > Hooray,
> > 
> >   I've just finished making my first ever module:- a dual 
> > attenuator.  Built into a 4HP Doepfer panel with A Sys knobs.  
I 
> > feel like a proud father.  Watch out Dieter!
> > 
> > Stuadh