Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: a106 examples with patched feedback loop

2004-09-15 by levka0

Very nice indeed Ingo !
Especially the 2nd clip tickels my senses

kind Regards
Joost

--- In Doepfer_a100@yahoogroups.com, "selfoscillate" 
<synaptic_music@y...> wrote:
> 
> hello all,
> 
> here are some more a106 examples, this time
> with additional modules patched into the
> feedback loop.
> 
> again the same drumloop was used as in my
> previous examples. the drumloop coming from
> an a119 was fed into the a106. the envelope
> follower output was used to modulate the
> cutoff frequency. the a106 output was then
> sent to the final vca (a131) for output
> level control.
> 
> each example represents a different feedback
> loop patch. the parameters may vary on each
> recording, especially the a106 input level
> and feedback level had to be re-adjusted
> on each patch.
> 
> each file is 120 kb in size.
> 
> here we go:
> 
> 1. filtermode: lowpass
> feedback loop: a125 phaser, followed by an a132 vca for
> level boosting. the a125 was modulated by an a145 lfo.
> 
> http://www.selfoscillate.de/a100files/a106-lp-a125.mp3
> 
> 
> 2. filtermode: lowpass
> feedback loop: a126 frequency shifter, followed by
> an a132 vca. both a126 and a132 were modulated by the
> a119 envelope follower output.
> 
> http://www.selfoscillate.de/a100files/a106-lp-a126.mp3
> 
> 
> 3. filtermode: lowpass
> feedback loop: a136 waveshaper
> 
> http://www.selfoscillate.de/a100files/a106-lp-a136.mp3
> 
> 
> 4. filtermode: highpass
> feedback loop: a136 waveshaper
> 
> http://www.selfoscillate.de/a100files/a106-hp-a136.mp3
> 
> 
> 5. filtermode: lowpass
> feedback loop: a114 ring modulator. the x-component
> of the ringmodulation was a sine wave, coming from
> an a111 vco. the a111 was pitch-modulated by the
> a119 envelope follower output. the a114 output was
> sent into an a138 mixer for level attenuation and
> then back into the a106.
> 
> http://www.selfoscillate.de/a100files/a106-lp-a114-a111.mp3
> 
> 
> 6. filtermode: lowpass
> feedback loop: a114 ring modulator. the x-component
> of the ringmodulation was the unfiltered audio signal
> coming from the a119.
> 
> http://www.selfoscillate.de/a100files/a106-lp-a114-a119.mp3
> 
> 
> 7. filtermode: highpass
> feedback loop: a137 wave multiplier
> 
> http://www.selfoscillate.de/a100files/a106-hp-a137.mp3
> 
> 
> 8. filtermode: lowpass
> feedback loop: a128 fixed filter bank
> 
> http://www.selfoscillate.de/a100files/a106-lp-a128.mp3
> 
> 
> enjoy :-)
> 
> best wishes
> 
> ingo

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.