Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Re: a107 examples

2004-09-22 by Florian Anwander

Hi Ingo

> please tell us your results with your a121/a122 attempt.
So I tried yesterday evening. I have no *.mp3's, sorry. I tried to 
imitate your example with a beat. In general the sound is different with 
two separated filters, becaus the cutoff frequency never is the 
identically, and also the phase relations are separated.  This makes the 
filtered sounds more vivid and less clean. When the filters are 
modulated by a slow LFO, the sound is quite similar; with the slow 
modulation the different behaviour of the separated filters is not that 
dominant. But with a modulation from the envelope follower or an ADSR, 
it gets more rough and partly queeky.

A filter combination, which can not be done with the A 107 but which is 
very handsome, is a notch filter with different cutoff frequencies:

         -->Lowpass
        /            \
Audio->              +->
        \            /
         -->Highpass

If the both filter frequencies are set to suppress the mid range 
frequencies, the beat becomes very vivid and fits very good in the mix, 
because now there is much "space" in the middle for other sounds.


Florian

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.