Doepfer

Hi,
You just need a special cable, not a new PSU
Can be bought from A.Sys. directly; not cheap (15 E or so)
I think they could also be made quite easily as a DIY project, 
especially if you have the original A.Sys. cable at hand.

Also, remember that the modules will not line up exactly with the A-
100's, as the mounting holes are slightly shifted in position.

regards
Joost

--- In Doepfer_a100@yahoogroups.com, "achtung_999" <ernst@d...> wrote:
> Hello,
> 
> I have some questions:
> 
> What is the catch with putting Analogue System modules in a Doepfer 
frame?
> Is it true that a seperate power supply is needed for that?
> 
> Also how far is the A195 module in its development?
> Since the Korg filter is now almost ready you could say a freq. to 
CV module would be 
> nice.. Since the MS20 has a similar kind of function on board.
> 
> Also I'd like to point out that a little bit of text about my 
(still humble) Doepfer system is 
> online here: http://www.xs4all.nl/~eloo999/Doepfer.html
> There's also some noises there...
> 
> Greetings,
> 
> Ernst