Doepfer

hello bakis,

thanks for the measurement :-)

best wishes

ingo


--- In Doepfer_a100@yahoogroups.com, "synth_freak_2000" 
<synth_freak_2000@y...> wrote:
> 
> hello ingo,
> i measured the a155 bottom row output voltage with the a197 vu-
meter 
> in the "direct measurement" mode: it is about 6,5 volts.
> but, if you pass this a155 bottom row voltage thru the a133 vc 
> polarizer you can make it have a range from 0 to 10 volts! i tested 
> that too.
> bakis.
> 
> 
> 
> 
> 
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "selfoscillate" 
> <synaptic_music@y...> wrote:
> > 
> > 
> > hello bakis,
> > 
> > oh really? i always thought that the bottom row has
> > 4 volts too, just like the upper row.
> > i'll have to check that on my a155's.
> > thanks for telling me :-)
> > 
> > best wishes
> > 
> > ingo
> > 
> > 
> > 
> > --- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
> > <synth_freak_2000@y...> wrote:
> > > hello ingo,
> > > nop, AFAIK, the max voltage out is about 7 volts, if
> > > you use the bottom (not scaled) analog row.
> > > bakis.
> > > 
> > > 
> > > 
> > > --- selfoscillate <synaptic_music@y...> wrote:
> > > 
> > > > 
> > > > --- In Doepfer_a100@yahoogroups.com, "klstay"
> > > > <kevinstay@e...> wrote:
> > > > > 
> > > > > I am trying to decide between a MAQ 16/3 or an
> > > > A-154, A-155, and A-
> > > > > 156. (Eventually a second A-155) Space is not a
> > > > constraint and I 
> > > > > would not mind routing the cables from the rear of
> > > > the MAQ to a 
> > > > > drilled out blank panel. The cost differential is
> > > > also not a 
> > > > factor. 
> > > > > Given that, which would people recommend and why?
> > > > 
> > > > difficult to say for me, i don't own a maq 16/3.
> > > > the only thing i can say is that the a154 added
> > > > so many functions to the a155, really stunning.
> > > > if you are going to buy the module solution, you
> > > > should
> > > > definitely buy two a155, and you should consider
> > > > buying
> > > > one or two a150 switches also.
> > > > 
> > > > the only thing which is a bit sad about the a155's
> > > > is
> > > > that the max voltage range is only 4 volts. ok for a
> > > > pure
> > > > a100 system, but if you are using other modulars as
> > > > well,
> > > > then 4 volts are not really suitable for all
> > > > purposes.
> > > > good that there are a133 polarizers available, which
> > > > i use
> > > > often together with the a155's. i don't know the
> > > > voltage
> > > > range of the maq 16/3, maybe it is 5 volts?
> > > > 
> > > > best wishes
> > > > 
> > > > ingo
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > > 
> > > 
> > > 
> > > =====
> > > Bakis Siros
> > > Parallel Worlds / Polariton
> > > Athens-Greece
> > > [Doepfer_a100] group owner
> > > http://www.shimarecords.co.uk
> > > http://www.ward12.com
> > > 
> > > 
> > > 		
> > > _______________________________
> > > Do you Yahoo!?
> > > Declare Yourself - Register online to vote today!
> > > http://vote.yahoo.com