Doepfer

dieter says:
"Because of the separation of keyboard and keyboard
controller it is
essential that the touch keyboard transmits the
information about the
touched plates to the separate controller. And this is
a digital (plate
touched yes/no) but not an analog information and can
be transmitted as 
midi
note on/off messages. This is why even the touch
version of the 
keyboard
will be equipped with midi out. Of course we could use
another 
transmission
protocol but why not midi. As we received a lot of
messages like yours 
we
decided to re-introduce the pressure sensitivity
again. At the moment 
we try
another pressure sensor as the first one (conductive
rubber) is very
expensive and requires a large-scale assembly. The
pressure information 
will
probably available as a CV directly at the touch
sensor keyboard and
transmitted via midi too (probably as after touch
messages).
The digital note on/off messages coming from the touch
sensor keyboard 
or
the "normal" keyboard can be processed by the separate
keyboard 
controller
that may be used e.g. to assign one or more separate
analog control 
voltages
(adjustable by rotary potentiometers) to each plate
resp. key of the
keyboard. In additon the keyboard controller will
offer some more 
functions
like analog sequencer controlled by the keyboard e.g.
to turn steps 
on/off
or to skip steps.

Best regards
Dieter Doepfer"









=====
Bakis Siros
Parallel Worlds / Polariton
Athens-Greece
[Doepfer_a100] group owner
http://www.shimarecords.co.uk
http://www.ward12.com


		
__________________________________ 
Do you Yahoo!? 
The all-new My Yahoo! - Get yours free! 
http://my.yahoo.com