Doepfer

> Here is an idea. Why not add a multi-pin header to the current mixers
> that would allow their inputs to be chained to each other. This way you
> could chain as many mixers together as you want to make a 4 by x matrix
> mixer (it could even jumper to adjacent rows to make an 8 by x matrix).
> I would guess this could be done now by wiring cables between the input
> jacks of the current models. A better idea - I have always hoped that
> Doepfer would allow access to the normalizing contacts on all the jacks
> used in the modules (at least the ones the can be used) like the old
> E-mu modular. Currantly most of them are shorted to the main input
> pins. This way you could chain the mixers inputs to each other through
> the normalized part of the jacks and by jacking into a mixer in the
> middle of a matrix, it would function normally. All it needs to be is a
> unused pad or donut - no pins or connectors.

We have already begun to introduce this suggestion into new modules.
If you look at the polarizing mixer A-138c you will find a 10 pin header
with the normalizing contacts available at the 10 pin header. A female
connector with 10 pin ribbon cable can be used to connect the normalizing
contacts to other CV or audio sources.

Best wishes
Dieter Doepfer

btw. how about a matrix polarizer instead of mixer ?