Doepfer

> Hi members,
>  i'm just new in the group...and pround to be in...
>
> my question :
>
> I have 2 basic system 2 ...and a MSQ16/3
> and I would like to send via the MSQ16/3 : 2 different
> sequences(at same tempo)according to one key (i.e A note...and
> change the event by pushing another key (i.e A# note) a...
> I would like to change the 2 sequences according to the new
> note...Shall I do it with the midi or with the CV/gate socket...
> I don't know if i'm very clear !!!???...
>
> I would like to change in same time the 2 diffrent sequences by
> pressing one note of the keyboard...Is it possible with the same
> midi channel ?
>
> thank you
> Mauro from Belgium

No problem. If you have a Midi keyboard available you need a Midi thru box
("Midi Multiple"). Connect Midi In of the box to your keyboard and 2 Midi
Out to Midi In of the 2 MAQs. Use relative note modes in both MAQs. That's
it.

But you can do the same in the CV world too: Use an A-185 Bus Access all
oscillators (e.g. A-110). Put the common transpose CV to CV In of A-185. The
sequence CVs are connected to the CV inputs of the at the 1V/Oct front
sockets of the oscillators.

Best wishes
Dieter Doepfer