Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Julian [mailto:julian@22host24.com]
> Gesendet: Freitag, 4. Februar 2005 02:16
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] more thoughts on the monster case
>
> An ideal solution (in my situation / opinion) would be some sort
> of power connector on the outside of the case (is it 4 or 5 pin
> xlrs that are often used for power?) such as the cases can be
> "daisy chained" (lid and base, or even multiple cases with a large
> enough psu)

I'd not recommend this as the connections between PSU and bus boards should
be as short as possible due to voltage losses for long cables. But of course
I could ask our case manufacturer to drill a hole with the desired diameter
for XLR connector into the rear instead of the rectangle mains inlet.

Best wishes
Dieter Doepfer