Doepfer

Hi Zoran, no problem :)

Anyway, hard sync use a saw wave too, not a square wave... May be is
working with a square but the circuit expect to see a rising or
falling edge , not an instant on-off state as a trigger or square.

Best Regards,

Josue.  


On Sat, 05 Feb 2005 18:31:04 +0000, Zoran Bosnjak <dj_allin@hotmail.com> wrote:
> 
> I thought that soft sync had to be driven with square wave, just like hard
> sync. Your comment is making me realize I made a pretty big mistake.
> 
> Zoran
> 
> >From: Josue Arias <josue.arias@gmail.com>
> >Reply-To: Doepfer_a100@yahoogroups.com
> >To: Doepfer_a100@yahoogroups.com
> >Subject: Re: [Doepfer_a100] Soft Sync on A111
> >Date: Sat, 5 Feb 2005 17:39:29 +0100
> >
> >Hi Zoran,
> >hmmm, ..and what is the question?
> >sync is driven using saw waves as is must to and then performs as it
> >should....
> >
> >Best Regards,
> >
> >Josue.
> >
> >On Fri, 04 Feb 2005 19:26:38 +0000, Zoran Bosnjak <dj_allin@hotmail.com>
> >wrote:
> > >
> > > Hi,
> > >
> > > I just had to share this with the list: I tried to set up soft sync
> >between
> > > two A-111s, by driving one with the square wave of the other. Result was
> > > that the pitch was wrong on almost every second note (almost like
> >partial
> > > SOU). Than I tried saw wave...
> > >
> > > Saw wave drives slave A111 perfectly! And the sound is just so right,
> > > usually finding perfect sweet spot after playing with octave switch on
> >both
> > > for a half minute. Try this!
> > >
> > > Regards,
> > >
> > > Zoran
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> 
> 
> Yahoo! Groups Links
> 
> 
> 
> 
>