Doepfer

Hi Bakis,

> so, the a185 cannot be used as a simple cv buffer
> module(like the AS rs230) ?

Yes it can!

> does the a185 has to always buffer and "write" from
> it's input to the buss board, or read the signals of
> the buss board and buffer them to it's outputs?
> can't anyone input a cv and/or gate singal to the
> a185's inputs and get this signal buffered from the
> a185's outputs (without these signals interfering with
> the bussboard)?
> i mean, does the a185 has to be connected to the
> bussboard in one way or another?

The central pin of the jumper is the bus board connection: with the 
jumper in the factory setting ('write' mode), the output of the 
buffer is connected to the bus board; with the jumper in the other 
position ('read' mode), the bus board is connected to the input of 
the buffer. So removing the jumper completely means the bus board is 
just not connected at all, and so the module then acts as a 
standalone buffer module.

Tim