Doepfer

to Dieter and to Anyone who could help---

I replaced the blown S-80C32 with the P80C32SBAA but nothing has 
changed...
if the two microcontrollers are compatible (i think they are more or 
less the same...) what else can be the problem??? the EPROM with the 
firmware? in this case, is it possible to re-program the EPROM or to 
obtain a new EPROM for the A190??

TIA

Antonio


--- In Doepfer_a100@yahoogroups.com, "Antonio Grazioli" 
<antonio_grazioli@f...> wrote:
> 
> 
> I just found on rs-components a part which seems OK.
> 
> MODEL: P80C32SBAA 
> MANUFACTURER: Philips
> SOCKET: PLCC44  
> Clock Mhz: 16  
> Bytes: 256  
> Ports: 32  
> Timers_Noxbits: 3x16  
> Serial I/O: UART
> 
> is that OK in your opinion?  
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" 
<hardware@d...> 
> wrote:
> > 
> > 
> > > -----Ursprüngliche Nachricht-----
> > > Von: Antonio Grazioli [mailto:antonio_grazioli@f...]
> > > Gesendet: Dienstag, 15. Februar 2005 08:24
> > > An: Doepfer_a100@yahoogroups.com
> > > Betreff: [Doepfer_a100] PROBLEMS WITH A190
> > >
> > > I'm pretty sure I have a old piece of electronic junk lying 
> around  that
> > > uses these processors, but what exactly?
> > 
> > It's an 80C32 microcontroller with PLCC44 case (the 80C32 also 
> available
> > with DIP40 case). You should be able to get it from an electronic
> > distributor for about 3 Euro. Of course it's available as spare 
> part from
> > us. We could add one for free to our next shipment to our Italian
> > representative (Pianeta Solaris) if you are not able to find one. 
> Pay
> > attention when removing the chip from the PLCC socket. The socket 
> could be
> > damaged if the chip is not removed carefully. In this case even 
the 
> socket
> > has to be replaced !
> > 
> > Best wishes
> > Dieter Doepfer